Bios was flashed with version 8.00.11 built on 3/23/07.
After the initial flash, settings were set back to default,
then the following settings were changed from the default.

Advanced
	Advanced Chipset Control
		Northbridge Configuration
			Memory Configuration
				Memclock Mode = Auto
				MCT Timing Mode = Auto
				User Config Mode = Auto
				Bank Interleaving = Disabled
				Burst Length = 4 Beats
				HardWare Memory Hole = Disabled
			ECC Configuration
				DRAM ECC Enable = Enabled
					MCA DRAM ECC Logging = Enabled
					ECC Chip Kill = Disabled
					DRAM Scrub Redirect = Enabled
					DRAM BG Scrub = 10us
				L2 Cache BG Scrub = 10us
				Data Cache BG Scrub = 10us
		HT1000 SouthBridge Configuration
			Hide XIOAPIC PCI Functions = Yes
			Power Button Instant Off = Enabled
	CPU Configuration 
		MTRR Mapping = discrete
	S-ATA Configuration
		S-ATA Mode = MMIO
	Super IO Configuration
		Restore on AC Power Loss = Power Off
	System Health Monitor
		CPU Overheat Temperature = 70
	System Fan Monitor
		Fan Speed Controll Mode = disable
Boot
	Boot Settings Configuration
		Quick Boot = disable
		Quiet Boot = disable
		Wait for "F1" If Error = disable
	Boot Device Priority
		1st Floppy
		2nd CDROM
		3rd Network slot 0218
		4th RAID :0:
		5th Network slot 0219