Steps to partition a new disk

1. Remove an empty harddrive carriage (usually P1 on any slave node) by pressing the button on the righthand side of the carriage(figure 1).
   Next pull down on the red handle and pull forward(figure 2).
   
   
2. Attach the hard drive to the carriage with four screws to the bottom, and place the it back into the machine it was removed from.
   
   
3. Reboot the slave node; and run the disk partitioning script.
   
   
4. Remove the disk from the machine/carriage.
   
   Now you have a disk ready for cloning in a Nemo slave node.