#include <cmdline.h>
Data Fields | |
| char * | source_name_arg |
| double | right_ascension_arg |
| double | declination_arg |
| double | orientation_arg |
| additional orientation phase, specifying 0.7853 will turn plus into cross (default='0'). | |
| char * | detector_arg |
| int | start_time_sec_arg |
| int | start_time_nanosec_arg |
| int | nsample_arg |
| double | sampling_interval_arg |
| int | n_ra_arg |
| int | n_dec_arg |
| int | start_ra_arg |
| int | count_ra_arg |
| int | start_dec_arg |
| int | count_dec_arg |
| char * | format_arg |
| char * | output_dir_arg |
| int | verbosity_arg |
| int | debug_arg |
| char * | earth_ephemeris_arg |
| char * | sun_ephemeris_arg |
| int | help_given |
| int | version_given |
| int | single_source_given |
| int | whole_sky_given |
| int | snapshot_given |
| int | timeseries_given |
| int | average_given |
| int | source_name_given |
| int | right_ascension_given |
| int | declination_given |
| int | orientation_given |
| int | detector_given |
| int | start_time_sec_given |
| int | start_time_nanosec_given |
| int | nsample_given |
| int | sampling_interval_given |
| int | n_ra_given |
| int | n_dec_given |
| int | start_ra_given |
| int | count_ra_given |
| int | start_dec_given |
| int | count_dec_given |
| int | format_given |
| int | output_dir_given |
| int | verbosity_given |
| int | debug_given |
| int | earth_ephemeris_given |
| int | sun_ephemeris_given |
| const char * | help_help |
| Print help and exit help description. | |
| const char * | version_help |
| Print version and exit help description. | |
| char ** | config_arg |
| configuration file (in gengetopt format) to pass parameters. | |
| char ** | config_orig |
| configuration file (in gengetopt format) to pass parameters original value given at command line. | |
| int | config_min |
| configuration file (in gengetopt format) to pass parameters's minimum occurreces | |
| int | config_max |
| configuration file (in gengetopt format) to pass parameters's maximum occurreces | |
| const char * | config_help |
| configuration file (in gengetopt format) to pass parameters help description. | |
| char * | label_arg |
| arbitrary string to be printed in the beginning of PowerFlux log file. | |
| char * | label_orig |
| arbitrary string to be printed in the beginning of PowerFlux log file original value given at command line. | |
| const char * | label_help |
| arbitrary string to be printed in the beginning of PowerFlux log file help description. | |
| char * | sky_grid_arg |
| sky grid type (arcsin, plain_rectangular, sin_theta) (default='sin_theta'). | |
| char * | sky_grid_orig |
| sky grid type (arcsin, plain_rectangular, sin_theta) original value given at command line. | |
| const char * | sky_grid_help |
| sky grid type (arcsin, plain_rectangular, sin_theta) help description. | |
| char * | skymap_orientation_arg |
| orientation of produced skymaps: equatorial, ecliptic, band_axis (default='equatorial'). | |
| char * | skymap_orientation_orig |
| orientation of produced skymaps: equatorial, ecliptic, band_axis original value given at command line. | |
| const char * | skymap_orientation_help |
| orientation of produced skymaps: equatorial, ecliptic, band_axis help description. | |
| char * | skyband_method_arg |
| method of assigning band numbers: angle, S (default='S'). | |
| char * | skyband_method_orig |
| method of assigning band numbers: angle, S original value given at command line. | |
| const char * | skyband_method_help |
| method of assigning band numbers: angle, S help description. | |
| int | nskybands_arg |
| split sky in this many bands for logging maximum upper limits (default='11'). | |
| char * | nskybands_orig |
| split sky in this many bands for logging maximum upper limits original value given at command line. | |
| const char * | nskybands_help |
| split sky in this many bands for logging maximum upper limits help description. | |
| double | large_S_arg |
| value of S to consider good enough. | |
| char * | large_S_orig |
| value of S to consider good enough original value given at command line. | |
| const char * | large_S_help |
| value of S to consider good enough help description. | |
| char * | band_axis_arg |
| which band axis to use for splitting sky into bands (perpendicular to band axis) (possible values: equatorial, auto, explicit(float,float,float) (default='auto'). | |
| char * | band_axis_orig |
| which band axis to use for splitting sky into bands (perpendicular to band axis) (possible values: equatorial, auto, explicit(float,float,float) original value given at command line. | |
| const char * | band_axis_help |
| which band axis to use for splitting sky into bands (perpendicular to band axis) (possible values: equatorial, auto, explicit(float,float,float) help description. | |
| double | band_axis_norm_arg |
| norm of band axis vector to use in S value calculation. | |
| char * | band_axis_norm_orig |
| norm of band axis vector to use in S value calculation original value given at command line. | |
| const char * | band_axis_norm_help |
| norm of band axis vector to use in S value calculation help description. | |
| char * | sky_marks_file_arg |
| file describing how to mark up a sky. | |
| char * | sky_marks_file_orig |
| file describing how to mark up a sky original value given at command line. | |
| const char * | sky_marks_file_help |
| file describing how to mark up a sky help description. | |
| int | fine_factor_arg |
| make fine grid this times finer (default='5'). | |
| char * | fine_factor_orig |
| make fine grid this times finer original value given at command line. | |
| const char * | fine_factor_help |
| make fine grid this times finer help description. | |
| double | skymap_resolution_arg |
| specify skymap resolution explicitly. | |
| char * | skymap_resolution_orig |
| specify skymap resolution explicitly original value given at command line. | |
| const char * | skymap_resolution_help |
| specify skymap resolution explicitly help description. | |
| double | skymap_resolution_ratio_arg |
| adjust default coarseness of the grid by this factor (default='1.0'). | |
| char * | skymap_resolution_ratio_orig |
| adjust default coarseness of the grid by this factor original value given at command line. | |
| const char * | skymap_resolution_ratio_help |
| adjust default coarseness of the grid by this factor help description. | |
| double | small_weight_ratio_arg |
| ratio that determines which weight is too small to include in max statistics (default='0.2'). | |
| char * | small_weight_ratio_orig |
| ratio that determines which weight is too small to include in max statistics original value given at command line. | |
| const char * | small_weight_ratio_help |
| ratio that determines which weight is too small to include in max statistics help description. | |
| double | strain_norm_factor_arg |
| strain normalization factor to prevent overflowing of the exponent (default='1e-20'). | |
| char * | strain_norm_factor_orig |
| strain normalization factor to prevent overflowing of the exponent original value given at command line. | |
| const char * | strain_norm_factor_help |
| strain normalization factor to prevent overflowing of the exponent help description. | |
| char * | lock_file_arg |
| file to lock when reading SFTs in order to globally serialize disk access. | |
| char * | lock_file_orig |
| file to lock when reading SFTs in order to globally serialize disk access original value given at command line. | |
| const char * | lock_file_help |
| file to lock when reading SFTs in order to globally serialize disk access help description. | |
| int | enable_dataset_locking_arg |
| set to 1 to enable dataset level locking (default='1'). | |
| char * | enable_dataset_locking_orig |
| set to 1 to enable dataset level locking original value given at command line. | |
| const char * | enable_dataset_locking_help |
| set to 1 to enable dataset level locking help description. | |
| int | retry_delay_arg |
| number of seconds to wait before retrying I/O (default='2'). | |
| char * | retry_delay_orig |
| number of seconds to wait before retrying I/O original value given at command line. | |
| const char * | retry_delay_help |
| number of seconds to wait before retrying I/O help description. | |
| int | lock_retry_delay_arg |
| number of seconds to wait before trying to acquire lock again (default='10'). | |
| char * | lock_retry_delay_orig |
| number of seconds to wait before trying to acquire lock again original value given at command line. | |
| const char * | lock_retry_delay_help |
| number of seconds to wait before trying to acquire lock again help description. | |
| char * | dataset_arg |
| dataset file. | |
| char * | dataset_orig |
| dataset file original value given at command line. | |
| const char * | dataset_help |
| dataset file help description. | |
| char * | input_format_arg |
| format of input files (GEO, SFT, Power) (default='GEO'). | |
| char * | input_format_orig |
| format of input files (GEO, SFT, Power) original value given at command line. | |
| const char * | input_format_help |
| format of input files (GEO, SFT, Power) help description. | |
| char * | dump_data_arg |
| file to output loaded SFT data into, for testing. | |
| char * | dump_data_orig |
| file to output loaded SFT data into, for testing original value given at command line. | |
| const char * | dump_data_help |
| file to output loaded SFT data into, for testing help description. | |
| char * | dump_sftv2_arg |
| directory to output loaded data, together with dataset description. | |
| char * | dump_sftv2_orig |
| directory to output loaded data, together with dataset description original value given at command line. | |
| const char * | dump_sftv2_help |
| directory to output loaded data, together with dataset description help description. | |
| char * | output_arg |
| output directory. | |
| char * | output_orig |
| output directory original value given at command line. | |
| const char * | output_help |
| output directory help description. | |
| char * | ephemeris_path_arg |
| path to detresponse program from lalapps. | |
| char * | ephemeris_path_orig |
| path to detresponse program from lalapps original value given at command line. | |
| const char * | ephemeris_path_help |
| path to detresponse program from lalapps help description. | |
| char * | earth_ephemeris_arg |
| Earth ephemeris file, overrides ephemeris-path argument. | |
| char * | earth_ephemeris_orig |
| Earth ephemeris file, overrides ephemeris-path argument original value given at command line. | |
| const char * | earth_ephemeris_help |
| Earth ephemeris file, overrides ephemeris-path argument help description. | |
| char * | sun_ephemeris_arg |
| Sun ephemeris file, overrides ephemeris-path argument. | |
| char * | sun_ephemeris_orig |
| Sun ephemeris file, overrides ephemeris-path argument original value given at command line. | |
| const char * | sun_ephemeris_help |
| Sun ephemeris file, overrides ephemeris-path argument help description. | |
| int | first_bin_arg |
| first frequency bin in the band to be analyzed. | |
| char * | first_bin_orig |
| first frequency bin in the band to be analyzed original value given at command line. | |
| const char * | first_bin_help |
| first frequency bin in the band to be analyzed help description. | |
| int | nbins_arg |
| number of frequency bins to analyze (default='501'). | |
| char * | nbins_orig |
| number of frequency bins to analyze original value given at command line. | |
| const char * | nbins_help |
| number of frequency bins to analyze help description. | |
| int | side_cut_arg |
| number of bins to cut from each side due to corruption from doppler shifts. | |
| char * | side_cut_orig |
| number of bins to cut from each side due to corruption from doppler shifts original value given at command line. | |
| const char * | side_cut_help |
| number of bins to cut from each side due to corruption from doppler shifts help description. | |
| int | expected_timebase_arg |
| expected timebase in months (default='6'). | |
| char * | expected_timebase_orig |
| expected timebase in months original value given at command line. | |
| const char * | expected_timebase_help |
| expected timebase in months help description. | |
| int | hist_bins_arg |
| number of bins to use when producing histograms (default='200'). | |
| char * | hist_bins_orig |
| number of bins to use when producing histograms original value given at command line. | |
| const char * | hist_bins_help |
| number of bins to use when producing histograms help description. | |
| char * | detector_arg |
| detector location (i.e. | |
| char * | detector_orig |
| detector location (i.e. | |
| const char * | detector_help |
| detector location (i.e. | |
| double | doppler_multiplier_arg |
| a constant to multiply Doppler shifts by (1.0 corresponds to standard physics) (default='1.0'). | |
| char * | doppler_multiplier_orig |
| a constant to multiply Doppler shifts by (1.0 corresponds to standard physics) original value given at command line. | |
| const char * | doppler_multiplier_help |
| a constant to multiply Doppler shifts by (1.0 corresponds to standard physics) help description. | |
| double | spindown_start_time_arg |
| specify spindown start time in GPS sec. | |
| char * | spindown_start_time_orig |
| specify spindown start time in GPS sec. | |
| const char * | spindown_start_time_help |
| specify spindown start time in GPS sec. | |
| double | frequency_offset_arg |
| (small) frequency offset - used to achieve fractional bin shifts (default='0.0'). | |
| char * | frequency_offset_orig |
| (small) frequency offset - used to achieve fractional bin shifts original value given at command line. | |
| const char * | frequency_offset_help |
| (small) frequency offset - used to achieve fractional bin shifts help description. | |
| double | spindown_start_arg |
| first spindown value to process (default='0.0'). | |
| char * | spindown_start_orig |
| first spindown value to process original value given at command line. | |
| const char * | spindown_start_help |
| first spindown value to process help description. | |
| double | spindown_step_arg |
| step for processing multiple spindown values (default='5e-10'). | |
| char * | spindown_step_orig |
| step for processing multiple spindown values original value given at command line. | |
| const char * | spindown_step_help |
| step for processing multiple spindown values help description. | |
| int | spindown_count_arg |
| how many separate spindown values to process (default='1'). | |
| char * | spindown_count_orig |
| how many separate spindown values to process original value given at command line. | |
| const char * | spindown_count_help |
| how many separate spindown values to process help description. | |
| double | fdotdot_arg |
| second frequency derivative (default='0.0'). | |
| char * | fdotdot_orig |
| second frequency derivative original value given at command line. | |
| const char * | fdotdot_help |
| second frequency derivative help description. | |
| char * | orientation_orig |
| additional orientation phase, specifying 0.7853 will turn plus into cross original value given at command line. | |
| const char * | orientation_help |
| additional orientation phase, specifying 0.7853 will turn plus into cross help description. | |
| int | nlinear_polarizations_arg |
| even number of linear polarizations to profile, distributed uniformly between 0 and PI/2 (default='4'). | |
| char * | nlinear_polarizations_orig |
| even number of linear polarizations to profile, distributed uniformly between 0 and PI/2 original value given at command line. | |
| const char * | nlinear_polarizations_help |
| even number of linear polarizations to profile, distributed uniformly between 0 and PI/2 help description. | |
| int | no_demodulation_arg |
| do not perform demodulation stage, analyze background only (default='0'). | |
| char * | no_demodulation_orig |
| do not perform demodulation stage, analyze background only original value given at command line. | |
| const char * | no_demodulation_help |
| do not perform demodulation stage, analyze background only help description. | |
| int | no_decomposition_arg |
| do not perform noise decomposition stage, output simple statistics only (default='0'). | |
| char * | no_decomposition_orig |
| do not perform noise decomposition stage, output simple statistics only original value given at command line. | |
| const char * | no_decomposition_help |
| do not perform noise decomposition stage, output simple statistics only help description. | |
| int | no_candidates_arg |
| do not perform analysis to identify candidates (default='0'). | |
| char * | no_candidates_orig |
| do not perform analysis to identify candidates original value given at command line. | |
| const char * | no_candidates_help |
| do not perform analysis to identify candidates help description. | |
| int | no_am_response_arg |
| force AM_response() function to return 1.0 irrespective of the arguments (default='0'). | |
| char * | no_am_response_orig |
| force AM_response() function to return 1.0 irrespective of the arguments original value given at command line. | |
| const char * | no_am_response_help |
| force AM_response() function to return 1.0 irrespective of the arguments help description. | |
| int | no_secondary_skymaps_arg |
| do not store values not essential for upper limits and followup (default='0'). | |
| char * | no_secondary_skymaps_orig |
| do not store values not essential for upper limits and followup original value given at command line. | |
| const char * | no_secondary_skymaps_help |
| do not store values not essential for upper limits and followup help description. | |
| char * | averaging_mode_arg |
| 1 - use one bin, 3 - average 3, matched - use 7 bin matched filter (default='1'). | |
| char * | averaging_mode_orig |
| 1 - use one bin, 3 - average 3, matched - use 7 bin matched filter original value given at command line. | |
| const char * | averaging_mode_help |
| 1 - use one bin, 3 - average 3, matched - use 7 bin matched filter help description. | |
| int | subtract_background_arg |
| subtract rank 1 matrix in order to flatten noise spectrum (default='0'). | |
| char * | subtract_background_orig |
| subtract rank 1 matrix in order to flatten noise spectrum original value given at command line. | |
| const char * | subtract_background_help |
| subtract rank 1 matrix in order to flatten noise spectrum help description. | |
| int | do_cutoff_arg |
| neglect contribution from SFT with high effective noise level (default='1'). | |
| char * | do_cutoff_orig |
| neglect contribution from SFT with high effective noise level original value given at command line. | |
| const char * | do_cutoff_help |
| neglect contribution from SFT with high effective noise level help description. | |
| int | filter_lines_arg |
| perform detection of lines in background noise and veto corresponding frequency bins (default='1'). | |
| char * | filter_lines_orig |
| perform detection of lines in background noise and veto corresponding frequency bins original value given at command line. | |
| const char * | filter_lines_help |
| perform detection of lines in background noise and veto corresponding frequency bins help description. | |
| int | ks_test_arg |
| perform Kolmogorov-Smirnov test for normality of averaged powers (default='1'). | |
| char * | ks_test_orig |
| perform Kolmogorov-Smirnov test for normality of averaged powers original value given at command line. | |
| const char * | ks_test_help |
| perform Kolmogorov-Smirnov test for normality of averaged powers help description. | |
| int | compute_betas_arg |
| compute beta coefficients as described in PowerFlux polarizations document (default='0'). | |
| char * | compute_betas_orig |
| compute beta coefficients as described in PowerFlux polarizations document original value given at command line. | |
| const char * | compute_betas_help |
| compute beta coefficients as described in PowerFlux polarizations document help description. | |
| char * | upper_limit_comp_arg |
| upper limit compensation factor - used to account for windowing in SFTs (possible values: Hann, flat, arbitrary number) (default='Hann'). | |
| char * | upper_limit_comp_orig |
| upper limit compensation factor - used to account for windowing in SFTs (possible values: Hann, flat, arbitrary number) original value given at command line. | |
| const char * | upper_limit_comp_help |
| upper limit compensation factor - used to account for windowing in SFTs (possible values: Hann, flat, arbitrary number) help description. | |
| char * | lower_limit_comp_arg |
| lower limit compensation factor - used to account for windowing in SFTs (possible values: Hann, flat, arbitrary number) (default='Hann'). | |
| char * | lower_limit_comp_orig |
| lower limit compensation factor - used to account for windowing in SFTs (possible values: Hann, flat, arbitrary number) original value given at command line. | |
| const char * | lower_limit_comp_help |
| lower limit compensation factor - used to account for windowing in SFTs (possible values: Hann, flat, arbitrary number) help description. | |
| char * | write_dat_arg |
| regular expression describing which *.dat files to write (default='. | |
| char * | write_dat_orig |
| regular expression describing which *.dat files to write original value given at command line. | |
| const char * | write_dat_help |
| regular expression describing which *.dat files to write help description. | |
| char * | write_png_arg |
| regular expression describing which *.png files to write (default='. | |
| char * | write_png_orig |
| regular expression describing which *.png files to write original value given at command line. | |
| const char * | write_png_help |
| regular expression describing which *.png files to write help description. | |
| int | dump_points_arg |
| output averaged power bins for each point in the sky (default='0'). | |
| char * | dump_points_orig |
| output averaged power bins for each point in the sky original value given at command line. | |
| const char * | dump_points_help |
| output averaged power bins for each point in the sky help description. | |
| int | dump_candidates_arg |
| output SFT data for first N candidates (default='0'). | |
| char * | dump_candidates_orig |
| output SFT data for first N candidates original value given at command line. | |
| const char * | dump_candidates_help |
| output SFT data for first N candidates help description. | |
| double | focus_ra_arg |
| focus computation on a circular area with center at this RA. | |
| char * | focus_ra_orig |
| focus computation on a circular area with center at this RA original value given at command line. | |
| const char * | focus_ra_help |
| focus computation on a circular area with center at this RA help description. | |
| double | focus_dec_arg |
| focus computation on a circular area with center at this DEC. | |
| char * | focus_dec_orig |
| focus computation on a circular area with center at this DEC original value given at command line. | |
| const char * | focus_dec_help |
| focus computation on a circular area with center at this DEC help description. | |
| double | focus_radius_arg |
| focus computation on a circular area with this radius. | |
| char * | focus_radius_orig |
| focus computation on a circular area with this radius original value given at command line. | |
| const char * | focus_radius_help |
| focus computation on a circular area with this radius help description. | |
| double | only_large_cos_arg |
| restrict computation to points on the sky with cos of angle to band axis larger than a given number. | |
| char * | only_large_cos_orig |
| restrict computation to points on the sky with cos of angle to band axis larger than a given number original value given at command line. | |
| const char * | only_large_cos_help |
| restrict computation to points on the sky with cos of angle to band axis larger than a given number help description. | |
| const char * | fake_linear_help |
| Inject linearly polarized fake signal help description. | |
| const char * | fake_circular_help |
| Inject circularly polarized fake signal help description. | |
| double | fake_ref_time_arg |
| time of signal start (default='0'). | |
| char * | fake_ref_time_orig |
| time of signal start original value given at command line. | |
| const char * | fake_ref_time_help |
| time of signal start help description. | |
| double | fake_ra_arg |
| RA of fake signal to inject (default='3.14'). | |
| char * | fake_ra_orig |
| RA of fake signal to inject original value given at command line. | |
| const char * | fake_ra_help |
| RA of fake signal to inject help description. | |
| double | fake_dec_arg |
| DEC of fake signal to inject (default='0.0'). | |
| char * | fake_dec_orig |
| DEC of fake signal to inject original value given at command line. | |
| const char * | fake_dec_help |
| DEC of fake signal to inject help description. | |
| double | fake_iota_arg |
| iota of fake signal to inject (default='0.0'). | |
| char * | fake_iota_orig |
| iota of fake signal to inject original value given at command line. | |
| const char * | fake_iota_help |
| iota of fake signal to inject help description. | |
| double | fake_psi_arg |
| orientation of fake signal to inject (default='0.0'). | |
| char * | fake_psi_orig |
| orientation of fake signal to inject original value given at command line. | |
| const char * | fake_psi_help |
| orientation of fake signal to inject help description. | |
| double | fake_phi_arg |
| phase of fake signal to inject (default='0.0'). | |
| char * | fake_phi_orig |
| phase of fake signal to inject original value given at command line. | |
| const char * | fake_phi_help |
| phase of fake signal to inject help description. | |
| double | fake_spindown_arg |
| spindown of fake signal to inject (default='0.0'). | |
| char * | fake_spindown_orig |
| spindown of fake signal to inject original value given at command line. | |
| const char * | fake_spindown_help |
| spindown of fake signal to inject help description. | |
| double | fake_strain_arg |
| amplitude of fake signal to inject (default='1e-23'). | |
| char * | fake_strain_orig |
| amplitude of fake signal to inject original value given at command line. | |
| const char * | fake_strain_help |
| amplitude of fake signal to inject help description. | |
| double | fake_freq_arg |
| frequency of fake signal to inject. | |
| char * | fake_freq_orig |
| frequency of fake signal to inject original value given at command line. | |
| const char * | fake_freq_help |
| frequency of fake signal to inject help description. | |
| double | snr_precision_arg |
| Assumed level of error in detection strength - used for listing candidates (default='0.2'). | |
| char * | snr_precision_orig |
| Assumed level of error in detection strength - used for listing candidates original value given at command line. | |
| const char * | snr_precision_help |
| Assumed level of error in detection strength - used for listing candidates help description. | |
| int | max_candidates_arg |
| Do not optimize more than this number of candidates (default='-1'). | |
| char * | max_candidates_orig |
| Do not optimize more than this number of candidates original value given at command line. | |
| const char * | max_candidates_help |
| Do not optimize more than this number of candidates help description. | |
| double | min_candidate_snr_arg |
| Do not optimize candidates with SNR below this level (default='5.0'). | |
| char * | min_candidate_snr_orig |
| Do not optimize candidates with SNR below this level original value given at command line. | |
| const char * | min_candidate_snr_help |
| Do not optimize candidates with SNR below this level help description. | |
| int | output_initial_arg |
| write initial candidates into log file (default='0'). | |
| char * | output_initial_orig |
| write initial candidates into log file original value given at command line. | |
| const char * | output_initial_help |
| write initial candidates into log file help description. | |
| int | output_optimized_arg |
| write optimized (second pass) candidates into log file (default='0'). | |
| char * | output_optimized_orig |
| write optimized (second pass) candidates into log file original value given at command line. | |
| const char * | output_optimized_help |
| write optimized (second pass) candidates into log file help description. | |
| int | output_cache_arg |
| write out all candidates in cache to log file (default='0'). | |
| char * | output_cache_orig |
| write out all candidates in cache to log file original value given at command line. | |
| const char * | output_cache_help |
| write out all candidates in cache to log file help description. | |
| int | extended_test_arg |
| Perform extended self test (default='0'). | |
| char * | extended_test_orig |
| Perform extended self test original value given at command line. | |
| const char * | extended_test_help |
| Perform extended self test help description. | |
| int | max_sft_report_arg |
| Maximum count of SFTs to report with veto information (default='100'). | |
| char * | max_sft_report_orig |
| Maximum count of SFTs to report with veto information original value given at command line. | |
| const char * | max_sft_report_help |
| Maximum count of SFTs to report with veto information help description. | |
| int | num_threads_arg |
| Use that many threads for computation (default='-1'). | |
| char * | num_threads_orig |
| Use that many threads for computation original value given at command line. | |
| const char * | num_threads_help |
| Use that many threads for computation help description. | |
| unsigned int | help_given |
| Whether help was given. | |
| unsigned int | version_given |
| Whether version was given. | |
| unsigned int | config_given |
| Whether config was given. | |
| unsigned int | label_given |
| Whether label was given. | |
| unsigned int | sky_grid_given |
| Whether sky-grid was given. | |
| unsigned int | skymap_orientation_given |
| Whether skymap-orientation was given. | |
| unsigned int | skyband_method_given |
| Whether skyband-method was given. | |
| unsigned int | nskybands_given |
| Whether nskybands was given. | |
| unsigned int | large_S_given |
| Whether large-S was given. | |
| unsigned int | band_axis_given |
| Whether band-axis was given. | |
| unsigned int | band_axis_norm_given |
| Whether band-axis-norm was given. | |
| unsigned int | sky_marks_file_given |
| Whether sky-marks-file was given. | |
| unsigned int | fine_factor_given |
| Whether fine-factor was given. | |
| unsigned int | skymap_resolution_given |
| Whether skymap-resolution was given. | |
| unsigned int | skymap_resolution_ratio_given |
| Whether skymap-resolution-ratio was given. | |
| unsigned int | small_weight_ratio_given |
| Whether small-weight-ratio was given. | |
| unsigned int | strain_norm_factor_given |
| Whether strain-norm-factor was given. | |
| unsigned int | lock_file_given |
| Whether lock-file was given. | |
| unsigned int | enable_dataset_locking_given |
| Whether enable-dataset-locking was given. | |
| unsigned int | ret |