This example program is identical to the tracker program just
described, which tracks spectral lines, but with one crucial difference:
it reads its data from FRAME files rather than from the old format
data stream. To run this program, type
setenv GRASP_FRAMEPATH /usr/local/GRASP/18nov94.1frame
trackerF | xmgr -pipe
and an animated display will start up.
To run this example in real-time on data coming out at the 40-meter
lab, type
setenv GRASP_REALTIME
trackerF | xmgr -pipe
and an animated display will start up.
Includes/trackerF.tex